Main Features:

1. Double Crane Brand Automatic Silage Round Baling & Film Wrapping Machine Model 9YQG--0.5

    is a specialized machine that can bale and wrap film on straw and forage grass in one processing

     progress.

2. Operating by 2 workers, high efficiency, low labor cost and low transportation cost.

3.Easy operating, high baling density, compact machine structure, nice appearance, strong and durable,

   less vibration, low power consumption, simple maintenance, low labor cost.

4.The machine can improve safety on the storage filed ,and greatly reduce the fire possibility after

   baling and may not occur auto- ignition. It is easy to store, the same amount of grass after baling,

   its volume can shrink more than two thirds to save covering area. It is also convenient to load and

   unload for transportation.

Advantages:  

This machine runs automatically with two people to work.Automatic messenger and raw material

feeding, , automatic alarm to stop conveying after the bundle size is enough big, then PE film

automatically packs and finishes cutting., PE film wrapping layers can be adjusted as the customer

request.

Specification: 

Working principle :

1.Raw materials are conveyed to bundling chamber through feeding conveyor.
2.As the bale is up to a certain density and enough big, alarm sounds and conveyor stops to feed,
reciprocating rope bundling begin and automatically to be cut after a bale is produced.
3.Air cylinder to control the chamber door open and unload the bale.
4.The bale rolls onto the rotating rack through signal turning plate, there is travel switch on the rotating

   rack to activate the automatic air cylinder to clip one end of the PE film.
5.When signal turning plate touches the travel switch,travel switch releases a signal to time relay to

   pull the PE film onto the bale, the rotating rack rotates to finish wrapping.
6.After the wrapping layer is up to the setting value, clutch disengages and the rotating rack stops,

  The  cutters on the side of rotating rack automatically cut down the PE film and press the broken

  PE film into the overlap of the bale surface.
7.Put the bale onto the handcart for storage.

Technical data for Straw sliage kneading machine :

Working principle for Straw sliage kneading machine :

The raw material is put into the inlet by hand and enter the working chamber by airflow and hammer

grasp.

Finally they become threadiness under the relative action between the hammers and toothed plate .

Straw silage kneading machine is of compact structure ,good appearance,durable and less vibration,

low consumption and so on.

Comapny